I pushed myself to finish and it’s now done. Yipee! Thanks for all your encouraging thoughts here and on the Facebook page.
![1813 Golden Spencer 1813 Gold Spencer](https://www.historicalsewing.com/wp-content/uploads/1813-Gold-Spencer-2-224x300.jpg)
So here’s the process (with quite a few pics):
Sifting through images for inspiration, I came across this one that shows two costumes from the movie Persuasion. (Now I don’t know exactly *which* version but I’m assuming the one with Amanda Root. Aren’t these just yummy?)
![Spencers - Persuasion Costumes from the film Persuasion](https://www.historicalsewing.com/wp-content/uploads/Long-Sleeves-Persuasion2-225x300.jpg)
So with my gold silk taffeta, I fell in love with this gold velvet design with the red piping. (I also loved the puffs on the dress but you’ll have to read about that in another post.) I loved the sleeves too. They puff and drape ever so nicely.
I also used some design ideas from this antique spencer from the Victoria & Albert Museum:
![V&A Green Spencer w-Pompoms V&A Green Spencer w-Pompoms](https://www.historicalsewing.com/wp-content/uploads/VA-Green-Spencer-w-Pompoms1-300x225.jpg)
(The book is Nineteenth Century Fashion in Detail by Lucy Johnston.)
The pom-poms are so period and fun but I decided to save that idea for another project. I did however, snatch the separate waistband idea and tried to replicate the sleeve idea with mine.
Element #2 – Fit and Element #3 – The Pattern:
I am a pattern hoarder. Yes, I collect sewing patterns.
So I wandered into my trusty collection to find something I could start with. What I found (among a whole lot of other patterns I’d love to make soon) was the Rocking Horse spencer pattern. Apparently YEARS ago (and I do mean years, like probably 8 ) I’d traced it out onto pattern ease (similar to interfacing) and was going to make it.
So I pinned it together and put it on my dressform. Wow! I was so surprised it fit as well as it did “out of the box.” You can see my pin fitting below.
![1st Pattern Testing back 1st Pattern Testing back](https://www.historicalsewing.com/wp-content/uploads/1st-Pattern-Testing-225x300.jpg)
![1st Pattern Testing front 1st Pattern Testing front](https://www.historicalsewing.com/wp-content/uploads/1st-Pattern-Testing-2-300x225.jpg)
My dressform bust is in it’s 21st Century pose and far away from the height & support it gets from my Regency corset. So I left the dart unpinned and fit it later when my corset was on. You can also see the pins marking my new armhole seam.
The sleeve pattern started from, I think, my 1839 blue floral dress from Costume College 2010. This is how it looked before I started pinning the heck out of it to make it tighter in the forearm and reducing the sleeve head/cap width to make it “look like picture.”
![Sleeve Before Patterning Sleeve Before Patterning](https://www.historicalsewing.com/wp-content/uploads/Sleeve-Before-Patterning-225x300.jpg)
And here’s the muslin mockup:
![Fitted mockup on dressform Fitted mockup on dressform](https://www.historicalsewing.com/wp-content/uploads/Fitted-mockup-on-dressform-225x300.jpg)
And the mockup with the paper collar pinned in:
![Collar pinned to mockup Collar pinned to mockup](https://www.historicalsewing.com/wp-content/uploads/Collar-pinned-to-mockup-225x300.jpg)
Once the mockup was fitted to my design, I cut out the silk taffeta fashion fabric, the red silk satin for the piping and buttons and sturdy cotton for the front and back underlining.
*Ok. What I’m about to tell you goes against the grain of my own teachings. But I decided to break my own rules for the sake of functionality. (“They’re more what we call – guidelines” anyhow.) Please don’t be offended. Please don’t scream out loud. I did this for a reason.
I cut my sleeve lining out of polyester satin. (cringe)Â AAAAAAAHHHHHHH!
Yes. I did the unthinkable and used a synthetic fabric. Why?
![Spencer Poly Sleeve Linings Spencer Poly Sleeve Linings](https://www.historicalsewing.com/wp-content/uploads/Spencer-Poly-Sleeve-Linings-300x224.jpg)
Well, it’s only in the sleeves. And it’s so I can slide my long dress sleeves (made from non-slippery cotton) easily into the spencer.
Have you ever tried to put on an outer garment that had cotton or linen linings over a cotton or linen garment? It can be a bit difficult to put it on. So this is the reason I decided to line the sleeves in a slippery fabric. (I’d love to hear your ideas on this “breach” of historical costuming.)
I love how the gathers turned out. The taffeta fabric helps a lot in keeping the sleeves “puffed.”
![Sleeve Gathers Sleeve Gathers](https://www.historicalsewing.com/wp-content/uploads/Sleeve-Gathers-225x300.jpg)
The spencer went together quite easily with only the side back and shoulder seams. The sleeves were finished at the wrist with the red piping sandwiched between the taffeta and lining. They were then set into the body and the lining seam allowance folded inside and tacked to cover the raw edges.
![1813 Gold Spencer back view 1813 Gold Spencer back view](https://www.historicalsewing.com/wp-content/uploads/1813-Gold-Spencer-back-224x300.jpg)
The collar was piped before it was sewn to the neckline. The bit of lace was hand gathered & tacked to the inside as a final trim.
![Spencer Collar Spencer Collar](https://www.historicalsewing.com/wp-content/uploads/Spencer-Collar-300x225.jpg)
The waistband was finished separately and hand tacked to the spencer hemline. It is purely for design style.
The 3/8″ buttons are for decoration only. The center front edges meet right at the front with no overlap. At this point I didn’t sew on any hooks to close the front as I want to wear it over all my other garments to test the fit then decide if I want to add the hooks or not.
![1813 Gold Spencer 1813 Gold Spencer](https://www.historicalsewing.com/wp-content/uploads/1813-Gold-Spencer-224x300.jpg)
This is so useful. I’m thinking of making a spencer from scratch using my ‘sloper. And how to get that lovely diamond back was confusing me. NowI se you have a shoulder seam and that back seam to make the ‘diamond’. I was also wondering if using darts was acceptable on a regency spencer?
You can find lots of antique spencers with darts in the front.
Thanks. I’ve just started ‘draping'(?) my paper pattern. I’m not sure how big the armhole should be to make it accurate? At the moment is fairly small as I reasoned its easier to take away than add back in.
Lovely! Six pieces total not including lining and waistband? Two front panels, back, two sleeves, collar? Did you do a box pleat on the sleeve cap? Looks so perfect for the Regency era!
Thanks! Yep, only 6 pieces plus linings. The sleeves were gathered but look a bit like pleats due to the stiff nature of the taffeta.
The piping looks beautiful as does the cut of the jacket. Kudos!
I recently made a Renaissance bodice in these same colors…and I’m in love with the combo! I think my heart stopped a little when I came to the collar pic–so rich!
For lining the sleeves – try habotai (as a poster already said) or, polished cotton or cotton sateen. I use cotton sateen to line my coats, it works nicely.
Yes, I would have definitely gone for something besides poly. But since I had to make this up quick and only had my small JoAnn’s to grab a lining, I went with the poly. I love cotton sateen and have used it for lining many times. Alas, the black I had in the stash wouldn’t have gone well with the yellow silk.
For lining sleeves — slippery is important. I, too, want to shun polyester as it is soooo hot! But it is on the inside of the garment and there are far worse things to squeek by on. Lovely garment!
I totally agree with your comments about the lining needing to be silky. If I’m going to be wearing my costume outside in the summer, however, I will use china silk, also referred to as habotai, in place of poly silk. I have learned through bitter experience that dehydration is no fun, so I’ve become a fanatic about natural fabrics, because of their ability to breathe. But for indoor (air conditioned)or spring/fall wearing, poly works for me too.
Not sure about making a matching hat. If I did, I wouldn’t make it the same gold yellow as the Persuasion hat. That’s just too much yellow around my face.
Since we don’t have much of the same fabrics they had back then, we have to use what we can. And I agree, I’d much rather gracefully slip my arm in and out of a sleeve instead of fighting with it.
Val
Super cute! When I saw your finished picture, I was reminded of that Persuasion spencer. Will there be a matching hat in the future?
Thanks Rae! One of these years I’m going to make it to the Bath festival with my husband. I’ve been itching to go for several years now so have a blast.
Best of luck on your spencer! And let us know your progress.
Gorgeous! I am a relatively new costumer (2 years) and I am tackling my first spencer for the JA Festival in Bath this Sept, so I found your diary very interesting and inspiring! Thank you 🙂